Cookie Img

DBS36E-BBAJ01000 Sick Incremental Encoder

DBS36E-BBAJ01000 Sick Incremental Encoder
DBS36E-BBAJ01000 Sick Incremental Encoder
Product Code : DBS36E - BBAJ01000
Product Description

DBS36E-BBAJ01000 Sick Incremental Encoder

    • Pulses per revolution1,000
      Measuring step90° electronically/pulses
      Measuring step deviation± 18° / pulses per revolution
      Error limits± 54° / pulses per revolution
      Duty cycle≤ 0.5 ± 5 %
      Initialization time< 3 ms
    • ELECTRICAL DATA
      Electrical interface4.5 V ... 5.5 V, TTL/RS422
      Connection typeCable, 8-wire, universal, 0.5 m
      Operating current≤ 50 mA (without load)
      Load current≤ 30 mA
      Output frequency≤ 300 kHz
      Reference signal, number1
      Reference signal, position90°, electric, logically gated with A and B
      Short-circuit protection of the outputs✔ 1)
      MTTFd: mean time to dangerous failure600 years (EN ISO 13849-1) 2)
      • 1) The short-circuit rating is only given if Us and GND are connected correctly.
      • 2) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
    • MECHANICAL DATA
      Mechanical interfaceBlind hollow shaft
      Shaft diameter8 mm
      Shaft materialStainless steel
      Flange materialAluminum
      Housing materialAluminum
      Material, cablePVC
      Start up torque0.5 Ncm (+20 °C)
      Operating torque0.4 Ncm (+20 °C)
      Permissible shaft movement, axial static/dynamic± 0.5 mm / ± 0.2 mm 1)
      Permissible shaft movement, radial static/dynamic± 0.3 mm / ± 0.1 mm 1)
      Operating speed6,000 min⁻¹ 2)
      Maximum operating speed8,000 min⁻¹ 3)
      Moment of inertia of the rotor0.8 gcm²
      Bearing lifetime2 x 10^9 revolutions
      Angular acceleration≤ 500,000 rad/s²
      • 1) Higher values are possible using limited bearing life.
      • 2) Self-warming 4.7 K per 1,000 1/min.
      • 3) No permanent operation. Decreasing signal quality.

    DBS36E-BBAJ01000 Sick Incremental Encoder

      • Pulses per revolution1,000
        Measuring step90° electronically/pulses
        Measuring step deviation± 18° / pulses per revolution
        Error limits± 54° / pulses per revolution
        Duty cycle≤ 0.5 ± 5 %
        Initialization time< 3 ms
      • ELECTRICAL DATA
        Electrical interface4.5 V ... 5.5 V, TTL/RS422
        Connection typeCable, 8-wire, universal, 0.5 m
        Operating current≤ 50 mA (without load)
        Load current≤ 30 mA
        Output frequency≤ 300 kHz
        Reference signal, number1
        Reference signal, position90°, electric, logically gated with A and B
        Short-circuit protection of the outputs✔ 1)
        MTTFd: mean time to dangerous failure600 years (EN ISO 13849-1) 2)
        • 1) The short-circuit rating is only given if Us and GND are connected correctly.
        • 2) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
      • MECHANICAL DATA
        Mechanical interfaceBlind hollow shaft
        Shaft diameter8 mm
        Shaft materialStainless steel
        Flange materialAluminum
        Housing materialAluminum
        Material, cablePVC
        Start up torque0.5 Ncm (+20 °C)
        Operating torque0.4 Ncm (+20 °C)
        Permissible shaft movement, axial static/dynamic± 0.5 mm / ± 0.2 mm 1)
        Permissible shaft movement, radial static/dynamic± 0.3 mm / ± 0.1 mm 1)
        Operating speed6,000 min⁻¹ 2)
        Maximum operating speed8,000 min⁻¹ 3)
        Moment of inertia of the rotor0.8 gcm²
        Bearing lifetime2 x 10^9 revolutions
        Angular acceleration≤ 500,000 rad/s²
        • 1) Higher values are possible using limited bearing life.
        • 2) Self-warming 4.7 K per 1,000 1/min.
        • 3) No permanent operation. Decreasing signal quality.
      Contact Us

      C- 88, First Floor, Sector-65, Noida, Uttar Pradesh, 201307, India
      Phone :+919632491583